Haven 10

short

The Haven 10 is an affordable manual transfer switch that allows you to backup essential circuits during a power outage. Use it with your Yeti PRO 4000 to keep lights on, fridges cooling, and personal devices charged.

box1

HAVEN 10 HIGHLIGHTS

• Customized Backup During Outages
  Installing the Haven 10 with your Yeti PRO 4000 gives you power for essential circuits during an outage
• Cover 10 Essential Circuits
  The Haven 10 can back up as many as ten 120 V circuits in your home. You get to choose which circuits are backed up—common options include Wi-Fi routers, refrigerators, family room outlets, and kitchen outlets.
• Convenient
  

  Instead of hauling your Yeti PRO around the house to power devices one at a time during an outage, leave it in one spot connected to the Haven 10 for power throughout your home.

HOME BACKUP POWER

Our customizable backup power solutions can cover up to 10 essential circuits when you connect your power station to the Haven 10 Manual Transfer Switch. Get reliable power during outages and emergencies. Power lights, fridges, medical devices, Wi-Fi routers, and more!

Automatic Power Switching

When grid power goes out, the circuits connected to the Haven 10 will switch to using power from the Yeti PRO in less than ten milliseconds! Just make sure your Haven 10 is connected to the Yeti PRO and that your switches are set to 'YETI'. It switches over so fast, you might not even realize the grid went down!

The Yeti PRO 4000 is not compatible with the Haven 10 when the Yeti PRO 4000 is drawing power from a GFCI protected circuit (whether it is directly plugged into the GFCI receptacle or another receptacle on the same circuit).

Select your 10 circuits to back up

We recommend choosing circuits that power your fridge, Wi-Fi router, and common areas like the living room and kitchen, but ultimately, you get to decide which circuits are most important to you.

box2

Goal Zero Ecosystem

The Goal Zero ecosystem is designed to give you control over your own power solutions, whether you're looking for home backup, work site power, off-grid power, ways to upgrade your camping trips, or power on the road. We offer portable power stations, expansion batteries, solar panels, lights, and more.

tech

PORTS

• Maximum Single-Pole Circuits: 10

• Conduit Length: 18 in. (45.7 cm)

• Conduit Size: 1 in. (2.5 cm)

• Circuit Breaker Protection: Breaker on each circuit

• Circuit Breaker Rating: 6 x 15 A, 4 x 20 A

• Maximum Supported Circuit Breaker: 2 x 30 A, 8 x 20 A

• Total Maximum Power: 7,500 W

• Power Inlet: NEMA L14-30R

• Circuit Breaker Protection: Each Circuit

Yeti PRO 4000 to Haven 10 Cable

• Length: 10 ft. (3 m)

  Connector(Yeti): TT-30P (Hots bridged)

  Connector(Haven 10 MTS): L14-30

HAVEN 10 3600W Pass-Through Cable

• (Flying Leads to Power Plus Input Cable)Length: 8 Ft. (3 m)
• Wire Gauge: 10AWG
• Current Rating: 40A

• The Yeti PRO 4000 is not compatible with the Haven 10 when the Yeti PRO 4000 is drawing power from a GFCI protected circuit (whether it is directly plugged into the GFCI receptacle or another receptacle on the same circuit).

GENERAL

• ProductSKU: 70050
• Warranty: 5 Years
• Made: USA
• Weight: 13 lbs. (5.9 kg)
• Dimensions: 11.8 x 11 x 4.5 in. (29.9 x 27.9 x 11.4 cm)
• Conduit Length: 18
• UL Listed: Yes
• Compatible: Yeti Pro 4000
• For Yeti 1500X, 3000X, 6000X* contact [email protected]